Find Metallographic Cutting Tester, Cutting Testing Equipment, Cutter Testing Equipment on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
New Products
Payment Type: | L/C,T/T,D/P,Paypal,Money Gram,Western Union |
---|---|
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Set/Sets |
Delivery Time: | 7-15 Days |
Model No.: DTQ-150
Item | Specification | Remark |
Grinding wheel (12.7mm,hole) | 150mm Ultra-thin cutting disc | |
Speed range | 200-1500 r/min | customizable |
Input voltage | single phase 220V,50/60Hz | |
Motor power | 125W | |
Overall Dimension | 405Lx 405W x 330H mm | |
Weight | 30kg |
Metallographic Grinding and Polishing Machine
This polisher is of single disc and suitable for carrying out pre-grinding. normal grinding and polishing against metallographic specimens. Since the machine has two speed, 300rpm and 600rpm,which favors the machine with wide applications. The machine is equipped with cooling system that can cool down the specimen during pre-grinding so as to prevent overheating and damaging the metallographic structure . It is convenient and on the safe side .It is an ideal option for the lab .of factories, science and research institutions and universities.
metallographic specimen inlaying machine
Metallographic specimen mounting presses suitable for the thermo-hardening plastic pressing of the small metallographic specimen which is not idiomorphic or hard to take.After forming, it will be very easy to process the grinding, polishing of the specimen and it is also convenient to process measuring of metallographic structure under metallographic microscope.
Metallographic Sample Cutting Machine
Metallographic specimen cutting machine can be used to cut various metal and non-metal materials so as to get specimen and observe the metallographic or lithofacies structure. It has cooling system so as to clear up the heat produced during cutting and avoid to burn the metallographic or lithofacies structure of specimen because of superheat. This machine features easy operation and reliable safety. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
BELT SURFACE GRINDING SPECIMEN MACHINE
Belt surface grinding machine is of new generation design, made according to the international standard and advanced process technique. It adopts sand belt to grind and polish the specimen. The different belts can be changed swiftly. This machine can be used to replace the disc grinder and manual type abrasive paper grinding. It only takes 1-2 minutes to for each belt to finish the operation. For the grinding of spectroscopy specimen, it is very economic to save time, labor and abrasive paper. This machine can be widely used in laboratories, researching institutes and factories.
Metallurgical Microscope
This device is used to identify and analyze the organizational structure of all kinds of metals and alloy materials. It can be widely used in factories and laboratories to verify the quality of casting, to inspect the raw material and analyze the metallographic organization of material after treatment, and to do some research work for surface spraying etc. This equipment can be equipped with photographic device to proceed photomicrography.
Contact us if you need more details on Metallographic Cutting Tester. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cutting Testing Equipment、Cutter Testing Equipment. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Metallographic Machine > Cutting Testing Machine